The THEIS PROFI LASER TPL 50 HV is a fully automatic levelling system with visible diode which can be used horizontal and vertical as well without additional adaptation. A permanent plummet beam and also a Scan-Function are part of the basic equipment. Only the radio remote control is optional.
Beyond, the laser has a so-called Tilt-Function: it effects that the instrument switches off even within the self-levelling range if, by inclination, the position considerably changes (for instance by accidental adjustment of a tripod leg). As a further novelty a Vibration-Protection has been integrated which can be activated by a separate key (MRS).
It effects that the laser does not switch off in case of light ground vibrations, but ignores them. Of course, the laser level is controlled by the servo-motors - not recognizable for the user. In the MAN-Function inclinations till max. ± 5° can be single-axial adjusted. Bigger inclinations can be produced by means of an angular table.
|
| Technical Data |
| Laser Class |
2 |
| Wavelength |
635 nm |
| Output |
max. 1 mW |
| Range (radius) |
ca. 50 m |
| with receiver TE2 |
ca. 250 m (Option) |
| Self-levelling range ±5° |
±5° |
| Tilt (y-axis, manual) |
±5° |
| Accuracy |
± 2,5 mm/50 m |
| Scan-Function |
5 steps |
| Speed |
5 steps, right/left turn, infinitely
variable |
| Power Source |
Akku 6 V NiMH; 3,0 Ah |
| Running time |
ca. 20 h |
| Charging time |
ca. 10 h |
| System of protection |
IP 65 waterproof |
| Weight |
ca. 2 kg |
| |
| Radio remote control (option) |
| Range |
ca. 80 m |
| Stand-by-function |
from remote control |
| Subject
to changes. |
|
